What problems will be encountered when installing and using ultrapure water machine?

In fact, water treatment can be divided into many types, and it can also be applied in many different industries or in different places. Beverage food processing water treatment, electronic medicine water treatment, industrial water treatment, etc. The water source for water treatment can be roughly divided into surface water and groundwater. Surface water can also be called above-ground water. It refers to water in rivers, rivers, lakes and reservoirs. Its large characteristics are low salt content and hardness, unstable water quality, and great changes with seasonal changes. Groundwater refers to deep well water that has been manually excavated. Its large characteristic is that it dissolves more salt in the water. The water quality is relatively stable and will not change due to seasonal changes.

The use of ultra-pure water machines is also becoming more widespread, and the technology of ultra-pure water machines is also increasing. Then let's talk about the installation problem of ultra-pure water machine. The ultra-pure water machine has undergone strict debugging and copying before leaving the factory, so the customer can directly install it after receiving the ultra-pure water machine, then the ultra-pure water machine Installation is to follow the interface on the instrument, so if the water inlets such as the water inlet, the waste water port and the water tank are connected incorrectly, it may cause unnecessary consumables.

If the interface of the water tank is connected to the water inlet of the water tank, the post-treatment ultra-purification column inside the instrument will not be effectively protected and will be consumed too quickly.

Therefore, we must look at the corresponding connecting lines of several nozzles of the ultra-pure water machine. Also, after the end of the experiment, remember to turn off the water and power supply of the instrument, which can effectively ensure the safety of the laboratory.

The ultra-pure water machine has high stability and generally does not cause any malfunction.

However, some problems caused by improper use of the customer cannot be ruled out. For example, the water supply requirement of the ultra-pure water machine is less than 300. If some customers do not know the original water condition, the ultra-pure water machine will be installed. Up, this will lead to excessive consumption of consumables in the instrument and greatly reduce their life.

There is also a hardness requirement of less than 125 mg/l. If the hardness is too high, the reverse osmosis membrane may be clogged and water cannot be produced. Therefore, when there is a problem with the customer's instrument, it is necessary to check the original water condition*, and if there is no clear fault, it will have a high cost for the later maintenance. Therefore, it is recommended that customers must understand the situation of raw water before purchasing.