Four notes on summer ginger
One is to pay attention to drought and waterlogging. Ginger is not resistant to drought or waterlogging. It is advisable to keep the soil moist during the growth period. During the high temperature period in summer, water should be watered in time to cool down, and water in the morning and evening is better. At the same time, pay attention to timely drainage after rain.
The second is to pay attention to shading and cooling. Ginger likes to shade, is not resistant to high temperature and strong light. Shading should be carried out during the summer growth period. It can be shaded by scaffolding, or covering the ground with grass, or intercropping for shade.
The third is to pay attention to timely soil cultivation. To prevent the rhizomes from coming out of the ground, the epidermis becomes thicker and the quality deteriorates, the soil should be cultivated, combined with watering and fertilization, for 2-3 times of soil cultivation, each time the thickness of the soil is about 3 cm.
Fourth, pay attention to comprehensive prevention and control measures for pest control. Rotation and stubble replacement, ginger disinfection before planting, drainage and waterlogging prevention, and chemical control can be combined. Diseased plants found in the field are promptly removed, and ginger holes are limed for disinfection. The main pests are ginger borer, ginger maggot, ginger thrips, etc. Vegetable farmers should observe the insect situation in time and use trichlorfon or phoxim for foliar spray control.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
I. Product Description
TC-EM-1 is a polymeric emulsifier, which is a low molecular weight, high electropositive organic polymer. It has followed advantages:
1. Easy to use, do not need cooking. Reduce cooking equipment for solid starch and lower down technical condition fluctuation for cooking the starch.
2. Use current water to dilute and prepare, without heating.
3. Provide a strong positive charge to the system
4. High emulsion stability
II. Product Feature
|
Appearance |
Red brown liquid |
|
Solid content % |
25. 50±0.5 |
|
Ionicity |
Cation |
|
PH value |
3.50~4.50 |
|
Viscosity(mpa.s/25℃) |
60.0 |
III. Product Usage Safety Instruction:
TC-EM-1 may be stimulative to skin and eyes, and it is recommended to use gloves and protective glasses when use. If eye or skin comes into direct contact with this product, immediately rinse with plenty of water for at least 15 minutes.
IV. Application
As a emulsifier and stabilizer of AKD,TC-EM-1 can provide a good stability of the emulsion. With the mechanical stirring, it can disperse AKD as required in the production process, which average particle diameter more than 80% can be less than 1.2 microns. It can also maintain a relative long time after the emulsification, and it has a certain electrical neutral to the slurry.
Please note, under high hardness, the hydrolysis rate of AKD emulsion will be greatly improved. So in order to reduce the rate of hydrolysis, the PH value of emulsified should be controlled between 4.5~5.0 by Citric Acid. TC-EM-1 has low PH value, which saves this part of the operation.
For certain application, the usage of TC-EM-1 should also follow the operating instructions of our company.
V. Other Information
Package: 1000Kg /IBC barrel
Storage: in cool and dry place, avoid frozen and sunshine
Shelf life: 6 months.
AKD Emulsifier,Starch Based Emulsifier,AKD Emulsifying Agent,25% AKD Emulsifier
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com