Long-term storage of dumpling skin machine must pay attention to the following points

It should be parked in a dry room. If you have to park outside, you should choose a flat floor and put wood. Cover it with a cover after parking. Before long-term storage, the machinery must be repaired, damaged, repaired, and thoroughly cleaned to maintain good technical condition.

Arrangement and arrangement at the airport should ensure that the entry and exit of any machine is not affected by other machinery. The mechanical fuel lever should be placed in the idle position and the joysticks placed in the neutral position.

Storage of the engine.

1 Release the cooling water from the engine.

2 Replace the engine oil. The new engine oil is usually neutral and will not corrode the metal parts of the engine.

3 The fuel tank is topped up with diesel to avoid rusting of the fuel tank. Preservatives should also be added if conditions permit.

4 During the shutdown period, the engine should be started once a month to make the machine travel for a short distance, so that a new oil film is formed in the lubrication parts of each part to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling water should be exhausted at the end.

Check the drum of the dumpling skin machine, the powder box, and whether there are accessories inside to prevent the machine from being damaged when the machine is turned on. Remove the shield and see if the tightness of the chain is appropriate. The chain should not be too loose or too tight. If it is loose, it will squeak. If it is too tight, the shaft will be bent.

Then check if the screws are loose. Connect the power supply, jog the switch, listen to the abnormal noise, then look at the dumplings machine is forward or reverse, if it is reversed, the power supply line head down, confirm no problem and then turn on.