Manual sprayer maintenance method

2024-02-21 18:06:36

First, after the sprayer is deactivated, the surface of the liquid barrel, hose, and spray bar must first be wiped clean. Special attention must be paid to removing grease from the pump and dirt from the bottom of the liquid barrel.

Second, because most pesticides have a certain amount of corrosive effect on sprayers, they should be washed with alkaline water and then rinsed with clear water. 2 hours because Bordeaux fluid is highly corrosive.

Third, pay attention to preventing rust. All removable parts must be removed and cleaned. The inner wall of the boom and nozzle should be washed with oil to prevent rust.

Fourth, we must do a good job of maintenance. Check each component in detail. Always apply glycerine to any screw-fixed part or place where it is frequently subject to wear. Make sure that the damaged parts are repaired in time.

Fifth, after completing the above inspections, the small parts should be wrapped in paper and placed in the reservoir to prevent accidental loss. The entire sprayer should be hung in a dry and ventilated warehouse. Do not place it in a dark, damp corner. Do not store it in the open air.

Capnometer ETCO2

Capnometer ETCO2,EtCO2,Capnography Monitor,Contec cms550dl Pulse Oximeter,Contec Pulse Oximeter how to use

Anesthesia Medical Co., Ltd. , https://www.trustfulmedical.com