Cleanroom Transfer Window Standard Operating Specification (General Edition)

Cleanroom Transfer Window Standard Operating Specification ( General Edition)

The dust-free workshop dedicated transfer window standard operating specification clarifies the operation content and standards, which allows users to better use the transfer window to ensure the safety of the clean room is not polluted. The transfer window is an auxiliary device for the clean room. It is mainly used for the transfer of small items between the clean area and the clean area or between the clean area and the non-clean area to reduce the number of times the clean room is opened and pollute the clean area. Reduce to a minimum.

purpose:

Use the transfer window safely and effectively to ensure the sterilization of the item.

Scope of application:

This specification applies to all kinds of transfer windows, air shower transfer windows, laminar flow transfer windows, mechanical interlock transfer windows, electronic interlock transfer windows, clean transfer windows, transfer cabinets, transfer boxes

Duties

1. The production workshop is responsible for complying with this procedure and is responsible for the normal operation and maintenance of the transmission window system.

2. The quality inspection department is responsible for the test of the quality of the clean room transfer window.

3. All maintenance activities that occur in the transfer window are required to fill in the records and archives.

Operation method:

1. Clean it once a day with a cloth dampened with disinfectant, and dry it with a clean dry cloth after each use.

2. Items with explosive properties cannot be placed in the transfer window.

3. The doors on both sides of the transfer window cannot be opened at the same time.

4. The article or medicine must be sterilized by ultraviolet light for at least 30 minutes in the transfer window.

5, the item can not be filled with the transfer window, there must be a certain distance between each item.

6. When using the transfer window to transfer articles, all the outer surfaces of the items to be transmitted must be thoroughly wiped with disinfectant (the rag can not be screwed too dry when wiping), open the outer door of the transfer window, and spray the disinfectant into the transfer window. Put the items (including the carton sealed with large mice) or medicines, close the door, and turn on the ultraviolet light for disinfection. After disinfection is completed, the UV lamp is turned off, and the person inside the barrier environment opens from the other side, takes out the item or medicine, and closes the door.

7. The item is transmitted from the SPF area. First open the inner door of the transfer window, put the items to be transferred into the transfer window, and close the door. The outside person opens the outside door, takes out the items, and then sprays the disinfectant into the transfer window to close the door.

Face Mask

3 Ply Surgical Mask,Disposable Medical-Surgical Mask,Coronavirus 3D Mask,Dust Masks With Filters Dust

Dongguan City Risen Medical Products Co., Ltd. , https://www.risenppe.com