Internal design of dehydrated vegetable dryer

2023-09-19 06:08:55
Dehydrated vegetables dryer meet roots, stems dried vegetable material, leaf strips, blocks, sheets, and other large particles and continuous production in large quantities, while the nutrients can zui large extent and color of the product to retain the like. Typical dry materials are: garlic slices, pumpkin, carrots, konjac, yam, bamboo shoots, horseradish, onions, apples, etc. When the dryer is working, the cold air is heated by the heat exchanger, and the natural air circulation is adopted to make the hot air flow through the dried material on the bed surface for uniform heat exchange, and the hot air flow in each unit of the body acts as a circulation fan. The hot air circulation is carried out, and the low-temperature and high-humidity air is discharged after the Zui, and the entire drying process is completed smoothly and efficiently.
The contents of the multi-layer inverting drying box are dehydrated and dried by layer by layer, and the wet air of the Zui is directly drained from the top layer, and the contact time between the wet wind and the object is extremely short (less than 5 seconds), completely avoiding the contact time of the wet wind and the article. The longer and longer "沤" phenomenon ensures the color of the item. The dehydrated vegetable dryer is developed and produced according to the principle of Chinese herbal medicine. It dehydrates and dries traditional Chinese medicine and dried fruits, and other drying equipments are unparalleled. The concept and production process are advanced and the degree of automation is high. In the temperature of the dryer, fan, moisture, walking speed, drying time, all controlled by PLC, reduce labor, increase production, and stabilize the baking products.
The internal design of the dehydrated vegetable dryer is a heat cycle wind, and the heat cycle wind can play the internal temperature of the dryer, and the air volume and the wind pressure are the same in all parts. The drying effect of the product is guaranteed. This design can also reuse the waste heat inside the dryer to greatly improve the thermal efficiency. The drying effect is excellent, the yield is 100%, and the dehydration is rapid, completely maintaining the original color and essence of the article. The drying box is a multi-layer structure, which is turned over and over, layer by layer, and the artificially turned sun is simulated under the sunlight.

Medical Isolation Shoe Covers

The medical protective shoe cover includes a coat, an inner bladder, a strap, a velcro surface, a non-slip bottom, and a velcro female surface. There is a sock-shaped inner liner that can be removed, and the anti-slip bottom is preferably provided with an anti-slip corrugated beef tendon bottom on the bottom surface; one side of the end of the strap is provided with a hook-and-loop fastener surface, and the other side is provided with a hook-and-loop fastener surface matching the hook and loop surface; the jacket Waterproof material is preferred, and elastic fabric is preferred for the inner liner; the jacket of the utility model is made of waterproof plastic material, and the anti-slip bottom surface adopts beef tendon bottom, which is strong and durable; The utility model can be reused after cleaning and disinfection, and can be used continuously after the inner tank is cleaned and disinfected; the arrangement of the straps enables the utility model to have the protection performance exceeding that of high-top shoe covers, but it is as convenient to wear as low-top shoe covers. Scope of application: used by medical personnel in medical institutions to prevent contact with potentially infectious patients' blood and body fluids, and play a barrier and protection role Instructions: Before use, unfold the isolation shoe cover, put on the shoe cover, put the socks and trousers into the isolation shoe cover, and fix it with straps. Through the actual operation of many people, it has been verified that Dongbei disposable non-woven isolation shoe covers are wear-resistant, waterproof, breathable, good isolation, and high-tube shoe covers do not slide down in one-time use. Features The product uses non-woven fabric or polyethylene film as the main raw material, which is cut, sewn into or thermosynthesized. Sufficient strength and barrier properties, provided non-sterile Product Description; This product is made of plastic film or non-woven fabric and rubber band by hot pressing. The biggest feature is that it is easy to use, and has a wide range of applications. Different materials have different corresponding functions, such as anti-skid, anti-static and dust-proof. Moreover, the price is much cheaper than the non-disposable shoe covers, and the handling is also convenient, especially the non-woven shoe covers, which can be naturally degraded. Scope of application: It is generally used by medical staff, hygienic, clean places, and laboratories. [Precautions] 1) This product is for one-time use only and will be destroyed after use. 2) This product should be stored in a well-ventilated and clean environment away from fire sources, with a relative humidity of not more than 80%, no corrosive gas, and good ventilation.

Medical Isolation Shoe Covers,Isolation Shoe Boot Covers,Non Slip Shoe Boot Cover,Medical Isolation Shoe Boot Covers

Jilin Sinoscience Technology Co. LTD , https://www.jilinsinoscience.com