Introduction of several key points affecting flour extraction rate in flour machinery complete equipment
2024-01-07 09:08:06
The flour extraction rate of flour machinery equipment is an important indicator to measure the quality of equipment. The average value is usually about 70%. The flour machinery equipment with low powder extraction rate will definitely affect the profit rate of customers and affect the complete set of flour machinery equipment. Here are a few key points of the powder rate. The following Hualiang Flour Machinery will give you a brief introduction.
1. The moisture content of raw grain wheat. Excessive moisture in the milled wheat will cause the production of the mill to decrease.
2. The degree of comminution of the material and the capacity of the abrasive material. When the flour processing machine is operated, the length of the grinding zone increases as the rolling distance decreases. At this time, the number of teeth of the fast roller to the material increases and the degree of pulverization increases, and the unit flow rate decreases accordingly. The wheat is ground by the road, because the endosperm is gradually scraped off, and as the number of the grinding wheel is pushed back, the bulk density of the material is reduced and the unit flow rate is also reduced.
3. The height of the grinding teeth. During the grinding process, as the grinding teeth gradually wear, the grinding teeth do not easily grasp the material, and the sliding on the surface of the grinding roller increases, that is, the moving speed of the material in the grinding region decreases. And because the grinding tooth height is reduced, the material in the two grinding teeth gap is reduced, and the output is gradually decreased.
4. Enter the uniformity of the material particles in the same grinding system of the flour machine. When the particle size of the material entering the same grinding system is very different, some small particles will not be subjected to grinding, so that the function of the flour processing machine cannot be exerted, and the yield will decrease.
5. The technical level of the operators of the flour processing machinery, good equipment, good raw grain, and good operators must have a good rate of flour extraction. ,
We know the factors that affect the rate of flour extraction, you can start these aspects and improve the flour extraction rate of flour processing machinery! Ensure that corporate profits are improved as much as possible.
Wenzhou Celecare Medical Instruments Co.,Ltd , https://www.celecaremed.com