Pollution-free and selenium-enriched lotus root planting technology
With the continuous improvement of people's living standards, the awareness of food quality and safety, pollution-free, selenium-enriched, and nutritional value is getting higher and higher. Se-enriched lotus root is widely loved by consumers, sales are getting bigger and bigger, and prices are rising. The benefits are very obvious. Planting lotus roots in the mid-alpine paddy fields in southern Shaanxi, especially the cultivation of selenium-enriched lotus roots, is very popular among consumers. Planting 667m2 lotus root, the output is between 1000 and 1500kg, and the output value is between 8,000 and 12,000 yuan. The yield and value of pollution-free and selenium-rich quality lotus root are higher, and the output can reach 1500-2000kg and the output value is 10000-20000 yuan. High-quality planting of pollution-free and selenium-enriched lotus root has technical requirements in terms of soil conditions, variety selection, planting techniques, field management, and rotation.
1 Soil preparation and fertilization
The transportation is convenient, the soil selenium content is above 0.2mg/kg, the paddy field with good irrigation and drainage conditions is used as the planting land, the depth of the plowed paddy field is 20~30cm, and the high quality farmyard manure is 3000kg per 667m2 (the distiller's grains are forbidden in the farmyard manure) Applying 5000kg of green manure instead of farmyard manure 10 days before planting; 100kg of cake fertilizer, 50kg of phosphate fertilizer, 30kg of potash fertilizer, evenly spread in the turned field; using rotary tiller or agricultural flat The field is mashed and flattened and ready to be broadcast. At the same time, 300-500kg of selenium fertilizer should be applied to 667m2 of the land with low selenium content (so that the soil containing more than 3mg/kg of selenium is sprinkled into the soil with low selenium content to achieve the purpose of selenium supplementation).
2 selection
There are two methods for seed selection: one is to select local fine varieties; there are 3 to 5 knots, and there are 1 or 2 branches in shoots; the characteristics are small product, low yield, good taste, powder, lubrication, and price. High; second, the introduction of excellent varieties; there are 3 to 5 knots, buds have 1 to 2 branches; the characteristics are: large product, high yield, poor taste, low price, easy to degenerate. The economic value of the two experiments is equivalent.
3 planting density and layout
The lotus root planting is best with a plant spacing of 1.5 meters and a row spacing of 2 meters. The planting layout adopts the south direction, and the lotus roots are headed to the south, which is planted in a wrong way (also known as plum blossom). When planting the southernmost row, the lotus will be planted. north. This not only achieves a reasonable layout, but also increases the density and can effectively increase the output.
4 planting time and depth
The lotus root planting time is from late March to early April. The ground temperature is stable when it is sown at 10-20 °C. The lotus root seedlings are placed in a good field and covered with mud (15-20 cm).
5 Daejeon Management
(1) Tube water and seedling inspection: Within 45 days after planting lotus root, ensure that the water level in the paddy field is moderate. Generally, the water depth is 10~15cm. When the water level is too low, it should be timely replenished. During this period, it should be observed whether the lotus plant is floating. E.com.cn/], or rot, if floating, it should be fixed with mud in time, and the rotted lotus should be treated and replanted in time. After the summer, the temperature rises and the evaporation is large. It is also the long-term lotus root. The water depth is 20~30cm, which can promote the maximum extension of the cockroach and effectively prevent the lodging. After the fall, as the temperature drops, the lotus roots turn into the starch growth period. At this time, the water level should be gradually shallowed. After the end of October, the dry water in the field will be used for mining.
(2) Weeding and pest control: Lotus seedlings are mainly duckweed and ragweed, and duckweed can be removed by drying field after 45 days. Dry the field water on a sunny day and let it dry for 3 to 5 days, so that the duckweed will be fixed on the soil. Manually remove the ragweed and other weeds while drying the field. When pulling the grass, care should be taken to protect the seedlings from damage. Practice has proved that lotus root can not use chemical herbicides, it is easy to rot the lotus root tubers, resulting in reduced production or even no harvest. The common insects of lotus root are mainly aphids and lotus budworms. At the same time as weeding and drying the fields, 667m2 is used to kill the cockroaches 15~40mil for the first time to prevent insects. After 5 days of drying the fields, the fields are filled with water for 667m2500~1000. Kg is mixed with water at the water inlet and placed in the field. It can be used for both fertilizer and insect control. It can be filled to 15cm, so that the effect of removing duckweed can be achieved. The use of biogas slurry to supplement fertilizer, while preventing insects, can also effectively prevent the disease of lotus root.
(3) Mining and seeding: After the end of October, the lotus roots are mature and can be mined and sold. When mining, the first choice is to plant the plots, and the flowering dense, lotus leafy plots will be reserved for the next year. The size of the area depends on the size of the planting area in the coming year. The second is to collect the land after planting, and pay attention to the integrity of the commodity lotus root when mining, so as to be sold with the excavation to ensure freshness.
(4) Rotation: Lotus root is a kind of water-fertilizer crop. It requires high soil fertility. Planting in a field often causes the incidence of lotus root to reduce production and increase the incidence of corruption. The rotation of lotus root can not only increase the yield, but also prevent pests and diseases. It is most suitable for rotation with rice. The sowing period is basically the same, which is beneficial to the field replacement, and does not miss the time of farming.
Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone
Roughness profiler all-in-one machine is an all-in-one machine for measuring profile shape and surface roughness, which has the powerful function of analyzing and measuring profile shape and surface roughness. Realize accurate measurement of dimensions, shape and roughness. It is mainly used to measure the parameters of the surface micro-geometry and macro-geometry of mechanical parts such as straightness, inclination, angle treatment, roundness treatment, double-groove treatment, double-arc treatment, etc.
Performance characteristics
1. High accuracy, high stability and high repeatability: meet the measurement accuracy requirements of the measured part.
1) Select high-precision grating measurement system and high-precision inductance measurement system, with high measurement accuracy;
2) Independently researched and developed high-precision grinding guide rail system, which has good wear resistance of guide rail materials and ensures stable and reliable operation of the system;
3) High-performance linear motor drive system ensures high measurement stability and good repeatability.
2. Intelligent management and detection software system:
The operation interface of the instrument is friendly, the operator can easily master the operation of the instrument, and the use is very simple.
1) The company has accumulated many years of practical measurement software design experience to provide customers with simple, practical and fast operation experience;
2) The company has invested many years of human resources in the development of instrument software, with special software copyright;
3) With powerful functions, it can automatically process data, print reports in various formats, and automatically display, print, save and query measurement records;
The data can be archived or printed in a centralized manner, which does not take up the verification operation time;
4) The measurement range is wide, which can meet almost all types of workpiece profile measurement, including special measurement functions of special workpiece screw, bearing, thread and other profiles;
5) The measured section can be selected automatically and manually for evaluation, and software functions can be customized according to customer requirements;
6) Powerful CNC automatic measurement and automatic labeling analysis function;
For large quantities of the same type of workpiece, it can carry out CNC measurement, automatically analyze and process the data, and carry out SPC statistics on the data, and can carry out statistical analysis in various ways to give quality control guidance;
7) It can automatically record and save all verification results by using computer large-capacity database storage.
3. It can also measure surface roughness and contour shape
With the same main body, you can only switch different modules to measure the profile shape and microroughness of the product.
4. Multi-parameter evaluation
The roughness can be automatically evaluated according to different standards, including Ra, Rp, Rv, Rz, Rt, Rmax, Rq, Rsk, Rku, RSm, RPc, Rdq, Rdc, Rmr and P parameters, W parameters, Motif parameters, Rcore parameters and other multi-parameter evaluation.
5. Thickness parameter measurement
When measuring the roughness parameters, the height and thickness of some film steps within 600 microns can be measured simultaneously. The measurement is convenient, and the accuracy is controlled within 2% H (H, the total height of measurement). It is especially suitable for high-precision measurement occasions without scratches.
6. Measuring force system:
With the voice coil motor force measuring system, the force measurement can be continuously adjustable from 10 to 150 mN, and the force measurement resolution can reach 0.2 mN; It avoids the force measurement error caused by the vibration of the surrounding environment when the old weight is loaded, and reduces the measurement error caused by the change of the force measurement.
7. Intelligent protection system:
The instrument is protected by hardware and software in all directions, which can effectively protect the instrument host and probe, and reduce the probe and instrument damage caused by personnel's operation errors.
8. Flexible manual control:
The instrument is equipped with a special separating operating rod, which can be placed at any position to control the operation when the instrument is operated and moved, and the measuring needle can be roughly positioned before measuring the workpiece; In the case of leaving the computer, the operating rod has the functions of moving the measuring needle left and right/up and down, emergency stop, the angle swing of the measuring rod up and down, and multi-level speed adjustment.
Profile Measuring Instruments,Profilometer Accuracy,Profile Measuring Machine,Surface Profile Measurement
Zhejiang dexun instrument technology co., ltd , https://www.dexunmeasuring.com