Six precautions for the use of sealed sample preparation and pulverizer
The sealed sample pulverizer is a mechatronics fully sealed structure with good sealing performance, advanced timing device and reliable sound insulation material. It has low vibration, low noise, high pulverization efficiency, easy operation and low energy consumption. The mortar material is made of high manganese steel, chrome alloy and super hard alloy. The department can be selected according to different needs.
Sealed sample pulverizer use precautions
1. This product has no special requirements for installation. It is placed in a dry place. When working, fix the four ground leveling screws on the bottom of the machine to make the machine stable.
2. Before the test machine, check whether the jaws are pressed tightly to avoid loosening of the material and damage the machine parts. The jaws of the material are tight in the clockwise direction and loose in the counterclockwise direction.
3. The sampled material should be taken after the machine has stopped.
4. If the moisture content of the sample is high, it should be pre-baked to avoid sticking of the binder and affect the fineness of the crushing. Generally, the dryer the sample, the better the pulverization effect.
5. If it is necessary to pulverize a sample smaller than 200 mesh, a solvent such as alcohol may be added to the sample to carry out mixed pulverization or prolong the pulverization time.
6, the sample should be placed in the ring and the box as much as possible, so as not to smash the block, affecting the fineness.
Hospital Bed,Bariatric Bed,Patient Bed,Hospital Bed Mattress
Pharmaceutical Intermediate Co., Ltd. , http://www.anbo-medical.com