Understand the characteristics of the pasteurizer and maintain cleaning problems

A pasteurizer is a pasteurization machine that uses a lower temperature to kill both germs and maintain the flavor of the nutrients in the product. It is a pasteurizer made for the basic principle of pasteurization.

Features of the pasteurizer:

1. Heating and temperature control, this is the iconic function of pasteurization. The accuracy of temperature control directly reflects the quality of the machine.

2, stirring and uniformity, this is also an essential function, because the machine will have the phenomenon of sticky bottom in the heating process, can be solved by adding evenly after mixing, and the milk slurry is stored for too long, may cause precipitation, need to be stirred Homogeneous.

3, rapid cooling, this is a derivative function of the machine, but if there is refrigeration, then the machine can quickly reach the recognition of a temperature, through precise temperature control, and the cooling function can save time Prevents the milk from deteriorating and odor at high temperatures and is easy to store.

4, thermal storage, this function provides users with very convenient.

Precautions for pasteurizer cleaning:

1. When cleaning, ensure that the supply of concentrated acid and alkali is sufficient.

2. For a long time of low temperature, check whether the butterfly valve of the ice water inlet and outlet is closed.

3. Whether the cooling water is turned on when the homogenizer is cleaned; when cleaning with the single-effect falling film cleaner, check the evaporation chamber.

4. When the conductivity meter of the cleaning circuit does not change for a long time, immediately check all valve actions, especially whether the manual valve is open.

5. The pressure of the Pap's discharge port is guaranteed to be 2.5-3.5 bar.

6. When cleaning 1500, select the cleaning mode according to the product requirements.

7. Cold homogenization cleaning is the same as pipeline cleaning.

8, cleaning alkali conductivity of 40ms, acid conductivity of 20ms.

Pump

Led Display Infusion Pump for Sale,Factory Med Medsystem IV Infusion Pump, Laboratory Syringe Pump

Medco Medical Equipment Co., Ltd. , http://www.sghospitalbed.com