Three major considerations for lobster farming
Lobster loves to make holes. Generally, the depth of the cave is 50 to 80cm. Some caves are more than 1m deep. In order to avoid escaping, the aquaculture water body should have a width of 1.5m or more, and a 0.5m high anti-escape should be installed around the quail. The net or inner wall has a smooth anti-escape wall and escape escape board. The fence also has to be buried 2m deep to prevent the lobster from escaping. At the same time, Hetang simulates the ecological environment of lobster under natural conditions, and 10-15% of aquatic plants and concealed plants are planted under the shallow side of the pond to create a habitat for lobsters and shelling, reducing mutual killing. The impact of water quality on lobster production cannot be ignored. In the breeding process, the pH of the pool water is maintained between 7.5-8.5 and the transparency is 30-40 cm. It is necessary to frequently add fresh water, regularly splash lime solution, adjust water quality, and prevent disease from occurring. And shelling is not easy.
2. Reasonably feed the feed
Lobsters will kill each other when they are starved and have insufficient food. Therefore, the amount of feed must be adequate. Lobster feed is animal and plant feed. Vegetable feed is wheat, aquatic grass, rapeseed cake, etc. Animal feedstuffs are miscellaneous fish, miscellaneous meats and livestock viscera. Normally, the feeding time, feeding amount and feeding method are determined according to the habit of lobsters buzzing and the density of shrimp in the pond.
3, scientific fishing
Juvenile shrimps can grow to commercial specifications within 60 to 90 days when the temperature is appropriate and feed is sufficient. The seedlings were released in March, and the arrests began in June and sold large and small.
Metal base electric Massage Table uses luxurious PU leather, high-density foam, ABS bottom shell, metal chassis, beautiful appearance, generous, fashionable. Three-motor control makes it easy to adjust the back, legs and bed height. The detachable armrest wrapped with a soft sponge is highly practical, highly safe, mechanically simple, and has a very low failure rate. Suitable for use in high-end spa clubs, massage parlours and beauty salons. The motor used in the beauty electric bed is a customized motor for medical devices. It is not a common beauty equipment accessory on the market. The motor noise is low and the quality is good. According to the analysis of the use cases of major medical customers, there has been no motor damage in three years.
One-to-one refers to: The backrest adopts a pressure rod to lift, manually adjust the angle, and fix it at any angle. The entire bed is controlled by a motor to move up and down.
One to two means that the backrest adopts a motor to automatically adjust the angle, and the bed surface also uses the motor to control the overall height of the lift. Easy to adjust and save time.
Metal Base Electric Massage Table
Metal Base Electric Massage Table,Electric Mature Massage Tables,Metal Chassis Electric Massage Table,Metal Electric Massage Table
MING MEI ROYAL SPA FURNITURE , https://www.mingmeibeauty.com