What are the basic characteristics of the PF455S walk-behind transplanter technology system?
1) With hydraulic profiling device. It can continuously adjust the machine state with the ups and downs of Daejeon's surface and hard floor to ensure that the machine's balance and insertion depth are consistent. At the same time, with the difference in soil quality due to the quality of the soil on the surface of the soil, a certain grounding pressure of the shipboard is maintained, and a strong muddy drainage is prevented from affecting the transplanted seedlings.
2) The indicators such as basic seedlings and depth can be adjusted quantitatively. The row spacing of the rice transplanter is fixed at 30cm (9 inches); the spacing between the rows is adjusted to 16th, 14th, and 12cm, reaching a planting density of 14,000, 16,000 and 18,000 holes per mu; by adjusting the lateral movement handles (third gear or The fourth gear) and the vertical feed adjustment handle (10 gears) are used to adjust the area of ​​the small picks taken to obtain the number of seedlings per hole so that the basic seedlings per acre reach 5 to 80,000. At the same time, the insertion depth can also be easily adjusted through the handle, which can fully meet the requirements of agronomic cultivation.
3) The degree of electromechanical integration is improved, and the operating performance is stable and reliable. The rice transplanters currently being promoted are based on the introduction of foreign advanced and mature technologies, and are optimized for joint venture development. A large number of automatic control and electromechanical integration technologies have been adopted to fully ensure the reliability, adaptability, and operational flexibility of the implements.
4) High theoretical operating efficiency. The walk-in transplanter is designed to operate up to 4 acres per hour theoretically. Under normal operating conditions, it is generally 2.5 acres per hour. Far more than manual transplanting efficiency.
Geogrid
The Geogrid including Polyester Geogrid, Fiberglass Geogrid, Steel Plastic Composite Geogrid and Plastic Geogrid.
The geogrid is a major geosynthetic material. Compared to other geosynthetic materials, it has unique performance and efficacy. Commonly used for reinforcement of soil structure or reinforcement of composite materials.
The uses of geogrid: It is suitable for embankment and embankment reinforcement slope protection tunnel wall reinforcement large airport parking lot wharf cargo yard and other permanent bearing foundation reinforcement.
The feature of geogrid:
The high strength creep can adapt to all kinds of environment soil, and can satisfy the use of high grade highway retaining wall.
It can effectively improve the locking and occlusion of the reinforced bearing surface, greatly enhance the bearing capacity of the foundation, effectively restrain the lateral displacement of the soil, and enhance the stability of the foundation.
More suitable for deep-sea operations, embankment reinforcement, fundamentally solve the other materials do stone cage due to long-term erosion by the sea caused by low strength, poor corrosion resistance, short service life and other technical problems.
It can effectively avoid the construction damage caused by the crushing and destruction of machinery and tools in the construction process.
Steel Plastic Geogrid,Polypropylene Geogrid,Stretch Plastic Geogrid,Biaxial Plastic Geogrid
ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scwiremesh.com