What should I do if the multi-function cutting machine malfunctions?

Multi-function cutting machine may encounter problems in use, and we should be able to calmly and correctly handle these unexpected situations.

The machine has failed. Xiaobian recommends that you do the following:

First, the multi-function cutting machine presses the start button, the machine does not have any reaction, you can first check whether the power supply is energized, under the condition of power, the machine does not respond, it may be a problem with the circuit. The multi-function cutting machine turns off the power, checks the motor wires, and whether there is a problem with the board, which may cause the machine to not work properly.

2. During the operation, the multi-function cutting machine stops running. One may be a power outage; the second may be that the motor has failed; the third is that the material is unevenly distributed, causing the machine to get stuck. In this case, you can do the troubleshooting method. Observe whether the machine indicator lights up, and if it is on, you can eliminate it. Continue to check further, cut off the power supply, check the inlet, check the cutter, whether there is foreign matter, and if there is foreign matter, it needs to be cleaned.

Third, the multi-function cutting machine to troubleshoot, first check the external factors from the machine, and then analyze the internal factors. Before each use, first check if the parts of the machine are tight, so that the machine can be better avoided, and these small problems cannot be operated.