Agricultural machinery winter custody skills
1. For agricultural machinery that is not used for a long time in winter, paint should be applied in a timely manner and a thorough brushing and maintenance should be carried out. Remove mud, oil, debris, etc. on the machine. Lubrication machinery, filling with oil, body painting. Do a good job of preventing rust and corrosion. Can effectively extend the service life of the equipment and avoid unnecessary losses.
Second, there must be a rain-proof, sun-proof, ventilated, and dry room (carport), and do not store it in the open air. Anti-theft, fire prevention, and safekeeping.
Third, when the temperature in winter is low and the locomotive finishes its work, it is necessary to promptly let go of the cooling water. Regardless of whether the tractors, agricultural vehicles temporarily stored in the warehouse, or combine harvesters that are not used for a long time, should open the radiator drain valve, the cylinder water jacket drain valve and the water tank cover, and crank the crankshaft. Allow the water to drain completely to prevent freezing of the body during cold weather.
Fourth, in cold weather, when the ambient temperature is low and the engine is started, hot water must be added to the cooling system to cyclically warm up the engine. Open the drain valve first, fill the tank with hot water of about 70°C, until the discharge valve flows out of the hot water with hot feeling, close the drain valve, and then pour the hot water of about 90°C into the tank before starting. When driving on icy and snowy roads, it is necessary to slow the speed at a low speed, and the locomotive must keep a certain distance from the person or car in front; when turning, it is necessary to slow down and slowly return to the steering wheel. High-speed driving and emergency braking are strictly prohibited so as to avoid a blockage accident.
Fifth, choose the right brand of diesel and motor oil. When the locomotive enters the winter, the fuel system should be cleaned once. According to regulations, diesel and engine oil used in winter are selected. The freezing point of general diesel oil is selected to be 5°C-10°C lower than the local temperature, and the engine oil must use the No.8 diesel engine oil with low viscosity. Before adding the diesel fuel to the fuel tank, it is generally necessary to precipitate for 48-96 hours. After filtering with a silk net, add the fuel tank. Some robots have tried to remove the filter screen of the filler port, which is wrong. It will cause the diesel fuel to enter the fuel tank, exacerbating the pump blockage and increasing the wear of the oil valve and the precision fittings of the fuel injector. The oil supply pressure is reduced, fuel injection performance is deteriorated, diesel fuel is burned, power is reduced, and the service life of the engine is greatly shortened.
Wiggle wire lock is designed to be used with poly lock base cap- sold separately. Greenhouse wiggle wire and base care are an effective method of attaching your poly film roof and or shade cloth. The greenhouse wiggle wire lock will hold form 4 mil to 20 mil thickness of material. Use one wire to hold the roof in place and then add a second wire to hold your shade cloth. When it is time to remove the shade cloth, you will not disturb the roof plastic.
Universal Base (WIG2000)- used on the curved surface, i.e. the arch for attaching the end wall covering.
Standard Base (WIG1000) - used along the straight lengths of your greenhouse.
Greenhouse Wiggle Wire,Greenhouse Steel Wire,Greenhouse Spring Wire
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.spgreenhouse.com