Attention to "five prohibitions" in the operation of agricultural machinery
Water tanks are not covered. Since the water tank is often opened and the lid must be opened and cooled before the cooling water is added, many operators are required to open the tank in order to save the time for cooling the lid by adding water. This will easily cause a large number of crop leaves and dust to enter the interior of the tank, and as the cooling water flows through the pump to reach the body and the cylinder head, it will directly affect the heat dissipation and cause the engine to overheat.
Do not turn off when troubleshooting is prohibited. Some operators found that the tractor or ancillary machine had a problem in the operation. For the convenience of the diagram, troubleshooting was performed without turning off the engine, which could easily lead to safety accidents.
It is forbidden to cut off the work machine power when the tractor is transferred. When the tractor is transferred in the field, it does not cut off the power and it easily causes the trencher and cultivator blades, the cutter of the harvester, the opener of the seeder, etc. to be damaged or bump into people when passing through fields, small ditch or other obstacles.
The operator is prohibited from leaving the job while the thresher is operating. During the busy farming season, some of the crews worked overtime and worked continuously, and they were tired. Some of them even left the post without permission to rest. This type of accident due to the operator left the job, resulting in thieves injury accidents occur frequently.
Do not wet the radiator with water. When many crewmen add potable water to the water tank, they first use a bucket of water to splash on the tank cover to lower the temperature, causing the heat sink to get wet. Some operators add overflowing water to the radiator plate. As everyone knows that doing so will only add to the frost, the air channel between the radiators is inherently small and susceptible to clogging with debris and dust. After pouring on the water, dust and impurities will adhere to the heat sink and the air passage area will be rapidly reduced or blocked. The cooling effect is reduced, resulting in shortening the pot boiling time and affecting the operation.
Nonsteroidal SARMS are alternatives to steroids, also known as selective estrogen receptor modulators. Unlike steroids, SARMS stimulates muscle more directly and more strongly than steroids. The stronger the targeting, the more targeted. SARMS is an optimized version of steroid substances that have steroid-like effects in the treatment of certain diseases. It may completely replace steroids in the future as a new and more effective drug.
Our company specializes in providing sarms series products
MK677
MK2866
GW501516
YK11
SR9009
RAD140
S4
S23
LGD4033
GW0742
We can provide liquid, powder, capsule, etc. Welcome to inquiry
MK677
MK2866
GW501516
YK11
SR9009
RAD140
S4
S23
LGD4033
GW0742 powder
MK677
MK2866
GW501516
YK11
SR9009
RAD140
S4
S23
LGD4033
GW0742 capsules
Mk 677 Tablets,Mk 677 Pills,Sarms Liquid And Powder,Muscle Building Powder Swarm
XI AN RHINE BIOLOGICAL TECHNOLOGY CO.,LTD , https://www.xianrhinebiotech.com