Biochemical incubator operation attention points
When using a biochemical incubator, it is not advisable to use a biochemical incubator in an abnormal environment such as high voltage, high current, or strong magnetic field to avoid interference and damage. When cleaning the biochemical incubator, wipe the inner wall of the box with a gauze soaked in alcohol. Disinfect the bacteria, then wipe off the alcohol with dry gauze. Do not use the equipment for a long time. Please unplug the power supply, and do the operation of each instrument, fault, abnormal record, and timely maintenance.
The specific points to note are as follows:
1. Before opening the biochemical incubator, you should be familiar with and understand the instructions of each component instrument and instrument, and master the correct use method.
2. Install as much as possible in a place where the air is quiet and the temperature changes little. Use a three-prong plug and the socket should be properly grounded.
3. It is strictly forbidden to contain volatile chemical solvents, explosive gases and flammable gases are placed in the box; flammability cannot be used near the incubator
Spray to avoid spark ignition.
4. After the training is finished, turn the power switch to “0â€. If you do not remove the item immediately, please do not open the door.
5. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. The side of the box should have a gap of 50mm, and the top of the box should have at least 300mm space.
6. The inside and outside of the box should be kept clean every day, and should be cleaned after each use. For a long time, the plastic dust cover should not be covered and placed in the drying room. At the same time, the inner wall of the box wall and the surface of the equipment should be wiped frequently to keep it clean and increase the transparency of the glass. Do not use acid, alkali or other corrosive solutions to wipe the outer surface.
7. Stop using, turn off the main power button, and the power switch at the back of the device. At the same time, avoid frequent opening of the door to keep the temperature stable and prevent dust and dirt from entering.
Blackhead Suction Tool,Best Blackhead Remover,Electric Blackhead Remover,Best Blackhead Suction Remover
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizons.com