Diesel Leakage Prevention Technology
1, glue repair glue leakage method. Oil tanks, water tanks, oil pipes, water pipes due to cracks or blisters, pores, etc. caused by small leakage, can be used adhesive glue smear in the clean damage can be.
2, add pad governance leakage method. If there is leakage at the leakproof gasket of the diesel engine oil pipe joint, a double-sided smooth thin plastic pad can be added on both sides of the leakproof gasket, and the leakage can be prevented by tightly tightening;
3, to drain the law. When many paper pads of diesel engine bottom case, cylinder head, gear chamber cover, crankcase back cover etc. leak, if the paper pad is in good condition and the joint surface is clean, apply a layer of butter on both sides of the paper pad and tighten the bolts. Leakproof; such as a new paper pad, the new paper pad in diesel soak for 10 minutes, remove and wipe, wipe a layer of butter on the joint surface and then install.
4, paint film leakage method. If the diesel engine tank, water tank, crankcase, etc. are leaking, the paint film can be soaked in alcohol and the paint film can be applied to the clean joint.
5, anaerobic glue leakage method. When leakage occurs at the vent bolt or stud bolt on the diesel engine, anaerobic adhesive can be applied to the thread or screw hole of the cleaned bolt. The film can be quickly cured to form a thin film and fill the gap of the part. This method is used in diesel engine high pressure. It is better to treat leaks at the threads of the oil pipe joints.
6, liquid sealant leakage method. When interfacial leakage and destructive leakage due to solid gasket defects occur on the diesel engine, apply a liquid sealant on the cleaned solid gasket joint surface to form a uniform, stable, continuous adherent strippable film gasket after curing. , can prevent leakage.
7, the size of the glue recovery method. When the shaft and bushing of a diesel engine, bearings and housings, valves and valves, self-tightening oil seals, packing, etc. are leaking, the size recovery glue can be used to smear the worn parts of the cleaned parts, and the abrasion resistance and mechanical strength after curing are formed. The higher film layers are then machined to restore the part's geometry and fit accuracy to resolve leaks.
Blood Plasma Products,Blood Products,Human Rabies Immunoglobulin,Viral Infection
Sichuan Yuanda Shuyang Pharmaceutical Co., Ltd. , http://www.syimmunoglobulin.com