Handle tractor chaos easy elimination
2020-02-11 11:08:07
Disturbance is one of the common faults of walking tractors. The conventional elimination method must first be removed after the towing frame or transmission cover is completely removed. This method is not only time-consuming and laborious, but also difficult for one person to complete.
For example, the position slot of the “worker-peasant-one type-2†walking tractor's position plate is in the shape of “workâ€. The 3rd gear and the 2nd gear are respectively on the left and right sides above the word “gongâ€; the reverse gear and the 1st gear are respectively on the left and right sides under the word “gongâ€. When the following chaotic situation occurs, it can be easily eliminated.
1. At the same time, hang the 2nd gear and reverse gear on the reverse side of the reverse box at the left side of the speed box (looking forward from the hand), and screw out a bolt (M8x25) that fastens the bearing cover, using a long one. About 180 mm, diameter 4 mm round steel into the bolt hole, a little push with a push on the pull out fork, you can put the gear into the neutral position. Then remove the 2nd gear and screw down a bolt (M10x85) that fastens the gearbox below the oil test hole of the gearbox on the clutch side. Use 1 round bar of the above specification to align with 2nd gear and 3rd gear dial. Fork, push a little harder to retract the 2nd gear into the neutral position.
2, while hanging 3 and 1 block
To open the 3rd gear, remove it at the above-mentioned first hole and remove the 1st gear, and remove it at the screw hole below the oil detection hole of the gearbox. The specific operation method is the same as above.
For example, the position slot of the “worker-peasant-one type-2†walking tractor's position plate is in the shape of “workâ€. The 3rd gear and the 2nd gear are respectively on the left and right sides above the word “gongâ€; the reverse gear and the 1st gear are respectively on the left and right sides under the word “gongâ€. When the following chaotic situation occurs, it can be easily eliminated.
1. At the same time, hang the 2nd gear and reverse gear on the reverse side of the reverse box at the left side of the speed box (looking forward from the hand), and screw out a bolt (M8x25) that fastens the bearing cover, using a long one. About 180 mm, diameter 4 mm round steel into the bolt hole, a little push with a push on the pull out fork, you can put the gear into the neutral position. Then remove the 2nd gear and screw down a bolt (M10x85) that fastens the gearbox below the oil test hole of the gearbox on the clutch side. Use 1 round bar of the above specification to align with 2nd gear and 3rd gear dial. Fork, push a little harder to retract the 2nd gear into the neutral position.
2, while hanging 3 and 1 block
To open the 3rd gear, remove it at the above-mentioned first hole and remove the 1st gear, and remove it at the screw hole below the oil detection hole of the gearbox. The specific operation method is the same as above.
Hyaluronic Acid Dermal Fillers, also known as "injectables" or "soft-tissue fillers," do just what their name suggests: they fill in the area under the skin. Some injectable dermal fillers are natural and some are synthetic, but they all work to improve the appearance of aging skin in the following ways:
1. Filling in wrinkles, fine lines and deep creases
2. Improving other imperfections like scars
3. Filling out thin or wrinkled lips
4. Plumping up cheeks
5. Contouring the jaw line and other areas of the face
2ml hyaluronic acid dermal filler
Qufu Hi-Tech Trading Co., Ltd. , https://www.chinahyaluronic-acid.com