The R300A vacuum suction filter is an instrument designed to filter the aqueous solution of the user's laboratory. Compared with the traditional suction filtration device, it pays attention to the detail design, such as the bottom quick drain (discharge without removing the funnel), and the hose interface protection cap. (The protective glass joint is not damaged when the hose is removed), the buffer cup (to prevent the filtrate from sucking up and damaging the vacuum pump), the rotary card funnel that can be changed with one hand, etc. These designs can simplify the operation steps of the user during filtration and save the test. time.
This article briefly introduces the installation steps and operation methods of the R300A vacuum suction filter:
1. Place the suction filter bottle in the middle of the fixed base, fix it on the smooth surface. After use, take out the suction filter bottle and gently lift the fixed base.
2. Insert the filter funnel base into the silicone plug.
3. Put the installed funnel base into the filter bottle mouth and fix it. Be careful not to use excessive force during operation.
4. Insert the rubber drain into the drain at the bottom of the collection bottle and clamp it with a clip.
5. Place the filter paper (filter/filter cloth) on the filter pad in the middle of the funnel base, and place the filter cup on the base while gently rotating to fix it.
6. Install the hose interface protection cap on the suction filter bottle. The hose interface protection cap can effectively protect the connector from being damaged when the hose is inserted or removed.
7. Connect the vacuum pump and the suction filter bottle with a silicone tube.
8. Connect the power to the vacuum pump and turn on the power switch.
Detailed product information is available on the website of Shanghai Lingde Instrument Co., Ltd.
Corrugated Breathing Circuit
The Corrugated Circuit is non-rigid tube used to convey gases or vapors between components of a breathing system. It`s mainly made of EVA material, extremely flexible, kinking resistant, very high quality. It can be assembled with water trap, anaesthesia mask, Breathing Bag, BV filter, HMEF and so on, to fit with various needs. Thus, there are different models according to the assembled accessories and tube length.
1 set of circuit include:4 tubes,2 straight connectors,1 Y-connector,1 elbow connector with luer cap,2 watertraps
size:Adult(ID 22mm),Pediatric(ID 15mm),Neonate(ID 10mm)
Made of medical grade silicone/ PVC
Circuit for breathing machine and anesthesia machine
Regular connector size (15mm, 22mm)
Any length for tube is available
Optional spare parts:Anesthesia mask,Breathing bag,BVF/HME filter,catheter mount,extra limb,sampling line,suction tube,airway cannula,Endotracheal tube, double lumen endobrochial tube, Laryngeal Mask Airway, mask, etc.
Corrugated Breathing Circuit,Corrugated Ventilator Circuit,Disposable Ventilator Circuit,Corrugated Anesthesia Circuit
Hangzhou Trifanz Medical Device Co., Ltd , https://www.cfzmeds.com