How to trim and reshape flowers
2021-04-16 00:01:49
Trimming Pruning To select the appropriate time and master the correct pruning methods, pruning can generally be performed during both dormant and growing periods. However, when they are specifically controlled, they should be determined based on their habits, cold tolerance and purpose of trimming. The general is: early spring first after flowering long leaves of flowers, such as plum, spring, etc., flower buds are born in the biennial branch, must be pruned after flowering, if the pruning in early spring before germination, will cut the flowering branches, resulting in no flowers phenomenon. Therefore, pruning should be carried out within 1-2 weeks after flowering, but at this time, the flowers and trees have begun to grow, the sap flow is relatively vigorous, and the amount of pruning should not be too large. The flowering plants in summer and autumn, such as crape myrtle, Chinese rose, and jasmine, all have their flower buds on the branches that were born that year and can be trimmed during the dormant period before germination. The leaves of the foliage can also be dormant. In the dormancy period pruning, cold resistance can be carried out in late autumn and early winter, and should not be trimmed prematurely so as not to induce autumn shoots, which is not conducive to flowering results in the coming year and freezing cold. Those who are afraid of pity should begin to flow in the early spring sap, but have not yet begun to sprout. In addition, the shape of flowers and trees, according to the purpose of cutting rough branches or pruning is to update, and therefore need to force pruning, are suitable for dormancy period. Pruning during the flower growth period is mostly for ventilation and light transmission, removal of branches and branches, leggy branches or for the purpose of regulating nutrition, making the flower posture more elegant, lush, and robust, and the degree of pruning should generally be light. Also note that the clipped buds are left outside, so that the sticks extend outwards, and the cuts become a bevel, leaving the buds to be in the other side of the cut. Cut the top of the slope should be slightly higher than the remaining bud 1-2 mm, not too high or too low.
1 Cut and toss: Cutting and picking are the work of removing the top of the growing shoot. The branches have hardened and need to be cut with scissors, the branches are tender, and the tenderness can be removed with fingers. The purpose of tipping and topping is to suppress high births and labor, to facilitate accumulation of nutrients, to enrich the branches, to promote lateral branching, to increase the number of branches and flowers, or to dwarf the plants, to complete the plant shape, and to flower neatly. Dali Ju can blossom more than 3,000 flowers on one plant, which is the result of repeated heart-picking. In addition, picking the heart can also inhibit growth and delay flowering.
2 Twig buds: Wiping buds are used to remove axillary buds, shoots, or buds of flowers. The purpose is to concentrate nutrients, promote the trunk to be straight and robust, flowers are large and bright, and the fruits are full and full.
3 Thinning: In order to adjust the posture of the tree, it is conducive to ventilation and light transmission. Usually, dry branches, worms, slender twigs, parallel branches, leggy branches, dense branches, etc. are often cut off. Can not be cut into the next level of branches, the upper incision in the branch point, cut at an angle of 45 degrees, the incision should be smooth, weak sprouting flowers, such as Guangyu Lan, Baimulan, etc., the amount of thinning should be less.
4 Scissive rooting: The work of cutting roots is usually carried out when transplanting or changing pots. For example, when the seedlings are transplanted, the main roots are cut short to promote the emergence of lateral roots. Suppresses shoots to grow long and promotes bud formation. Shearing usually takes place during the dormant period, but when the plants are too long, rooting operations can also be performed during the growing season.
5 stand bracket: commonly known as "banding racket" (bracket commonly known as "tempo") cultivation of creeping potted flowers such as creeping Hydrangea, Ling Xiao, wisteria, etc., the application of fine bamboo rod, reed rod or wire binding bracket, with tied Branches and vines make them climb and increase their ornamental effect.
There are various forms of plastic surgery, such as single-dry type (such as single chrysanthemum, single dry dahlia, etc.), multi-dry type (such as jellyfish, pomegranate, flower peach, flower plum, etc.), cluster type (such as palm bamboo, southern bamboo , Pteris, etc.), weeping branches (such as cliff chrysanthemums, ivy, etc.), in short, according to the needs and preferences of art processing, careful pondering, careful conservation, in order to achieve the desired purpose.
1 Cut and toss: Cutting and picking are the work of removing the top of the growing shoot. The branches have hardened and need to be cut with scissors, the branches are tender, and the tenderness can be removed with fingers. The purpose of tipping and topping is to suppress high births and labor, to facilitate accumulation of nutrients, to enrich the branches, to promote lateral branching, to increase the number of branches and flowers, or to dwarf the plants, to complete the plant shape, and to flower neatly. Dali Ju can blossom more than 3,000 flowers on one plant, which is the result of repeated heart-picking. In addition, picking the heart can also inhibit growth and delay flowering.
2 Twig buds: Wiping buds are used to remove axillary buds, shoots, or buds of flowers. The purpose is to concentrate nutrients, promote the trunk to be straight and robust, flowers are large and bright, and the fruits are full and full.
3 Thinning: In order to adjust the posture of the tree, it is conducive to ventilation and light transmission. Usually, dry branches, worms, slender twigs, parallel branches, leggy branches, dense branches, etc. are often cut off. Can not be cut into the next level of branches, the upper incision in the branch point, cut at an angle of 45 degrees, the incision should be smooth, weak sprouting flowers, such as Guangyu Lan, Baimulan, etc., the amount of thinning should be less.
4 Scissive rooting: The work of cutting roots is usually carried out when transplanting or changing pots. For example, when the seedlings are transplanted, the main roots are cut short to promote the emergence of lateral roots. Suppresses shoots to grow long and promotes bud formation. Shearing usually takes place during the dormant period, but when the plants are too long, rooting operations can also be performed during the growing season.
5 stand bracket: commonly known as "banding racket" (bracket commonly known as "tempo") cultivation of creeping potted flowers such as creeping Hydrangea, Ling Xiao, wisteria, etc., the application of fine bamboo rod, reed rod or wire binding bracket, with tied Branches and vines make them climb and increase their ornamental effect.
There are various forms of plastic surgery, such as single-dry type (such as single chrysanthemum, single dry dahlia, etc.), multi-dry type (such as jellyfish, pomegranate, flower peach, flower plum, etc.), cluster type (such as palm bamboo, southern bamboo , Pteris, etc.), weeping branches (such as cliff chrysanthemums, ivy, etc.), in short, according to the needs and preferences of art processing, careful pondering, careful conservation, in order to achieve the desired purpose.
We have not only conventional Honey but also Organic Honey, which have certified by BCS German. The main type is Organic Polyflora Honey, Organic Acacia Honey and Organic Vitex Honey, which come from the northeast of China and Northwest of China. We supply transaction issued by BCS GERMAN for each lot when export.
Organic Honey
Organic Polyflora Honey,Organic Acacia Honey,Organic Vitex Honey,Bee Honey,Vitex Honey
Easy Food (Jiaxing) Co., Ltd. , https://www.jxeasyfood.com