How to use and maintain the V-type mixer
2021-09-07 14:07:21
In the case of strip operation, first open the mixer feed port and confirm whether the discharge port is closed or closed, and put a specified amount of material into the V-type hopper according to the process control requirements. After the feeding is completed, in order to prevent the material from flowing out during the mixing, the feeding port should be closed and locked.
Next is the time when the machine works. Turn on the power button, rotate the stop button to the left, start the reverse button of the mixer, and adjust the motor speed to 600r/min for the product to be mixed at the specified speed. After the mixture reaches the specified time of the process, stop by adjusting the motor speed button. When the machine stops, the mixer discharge port should be facing the ground, and adjust the motor speed button to 0. The V-type mixer will stop the button. Rotate right to cut off the power.
After the zui is the discharge: open the V-mixer feed port, and use the specified container to charge at the discharge port until the material in the hopper is drained.
There are still many things that we need to pay attention to during the installation and use of the V-type mixer. This will help us maintain the V-type mixer and increase its service life.
1. Installation: Place the machine stably, install the machine feet, and level the machine to make the mechanical energy run freely.
2. Before use, add oil to the oiling station, then carry out no-load operation, check whether the fasteners are loose, whether the electrical is normal, whether the machine is working properly, and if there is any abnormality, carry out renovation and debugging.
3. Turn the feeding port to the top, open the feeding cover for feeding, the feeding amount should not exceed the specified volume, then close the feeding cover, start the machine to run, if abnormality is found on the way, it must be stopped for inspection.
4. After work or after changing the variety, the inside and outside of the hopper must be rinsed clean. It is suitable for the mixing of powder or granular materials in chemical, food, pharmaceutical, feed, ceramic, metallurgical and other industries. The structure of the machine is reasonable, simple, and the operation is closed. The feeding and discharging are convenient. The manual (vacuum or vacuum feeding) cylinder is made of stainless steel material, which is easy to clean and is one of the basic equipments of the enterprise.
Next is the time when the machine works. Turn on the power button, rotate the stop button to the left, start the reverse button of the mixer, and adjust the motor speed to 600r/min for the product to be mixed at the specified speed. After the mixture reaches the specified time of the process, stop by adjusting the motor speed button. When the machine stops, the mixer discharge port should be facing the ground, and adjust the motor speed button to 0. The V-type mixer will stop the button. Rotate right to cut off the power.
After the zui is the discharge: open the V-mixer feed port, and use the specified container to charge at the discharge port until the material in the hopper is drained.
There are still many things that we need to pay attention to during the installation and use of the V-type mixer. This will help us maintain the V-type mixer and increase its service life.
1. Installation: Place the machine stably, install the machine feet, and level the machine to make the mechanical energy run freely.
2. Before use, add oil to the oiling station, then carry out no-load operation, check whether the fasteners are loose, whether the electrical is normal, whether the machine is working properly, and if there is any abnormality, carry out renovation and debugging.
3. Turn the feeding port to the top, open the feeding cover for feeding, the feeding amount should not exceed the specified volume, then close the feeding cover, start the machine to run, if abnormality is found on the way, it must be stopped for inspection.
4. After work or after changing the variety, the inside and outside of the hopper must be rinsed clean. It is suitable for the mixing of powder or granular materials in chemical, food, pharmaceutical, feed, ceramic, metallurgical and other industries. The structure of the machine is reasonable, simple, and the operation is closed. The feeding and discharging are convenient. The manual (vacuum or vacuum feeding) cylinder is made of stainless steel material, which is easy to clean and is one of the basic equipments of the enterprise.
We are a reliable manufacturers of Cosmetic Raw Materials in China; with advanced R & D and manufacturing in Skin Care Materials. With high-quality products of Cosmetic Ingredients, we can be a trust suppliers / factory. As a wholesale of Daily Chemical Material, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Cosmetic Ingredients,Skin Care Materials,Daily Chemical Material,Cosmetic Raw Materials
Xi'an Quanao Biotech Co., Ltd. , https://www.quanaobio.com