Golden needle mushroom salting process
1, pre-cook 5% to 10% salt water in aluminum pot boiled, pour in needle mushroom, boil 5 to 7 minutes, remove and drain water.
2. Salt Add 25 to 30 kg of salt per 100 kg of mushrooms. First put a layer of salt on the bottom of the tank, add a layer of mushrooms, repeatedly to the cylinder full, and then into the boiling brine after cooling, so that mushrooms soaked in salt water, then add the adjustment solution, so that the solution pH value of about 3.5, insufficient Adjust with citric acid.
3ã€Manage the winter cylinders once in 7 days in a total of 3 times; once in 2 days in summer, a total of 10 times. Generally salted for 20 days before shipping.
Printing Glow In Dark Tape
1. Material and classification of glow in dark tape
We have PET material glow in dark tape and PVC material glow in dark tape. PET material is cheaper but not printable. PVC material support customized printing with low MOQ.
For both materials, we have different kinds according to the glowing time it can last after full charging (0.5hours charging at least). We have 2hours, 4hour, 6hours, 8hours and 10hours according to the glowing period it can last.
2. Colors for choosing
We have light green, pink, orange, red, blue, white for choosing.
3. Features
a. Good ahesion, we use solvent acrylic adhesive, the adhesive is strong and long lasting.
b. Waterproof. Both PET and PVC material are waterproof. Can used for both indoor and outdoor usage.
c. Long service life: 2~3 years even for outdoor usage.
d. Different sizes for choosing: 1.24m x 45.7m log roll, or other customized sizes such as 25mm/ 50mm x 5meters/ 10yards/ 10meters/ 18meters, etc.
e, Accept die cuting to small pieces such as dots, stars, arrows, etc,
Printing Glowing Tape,Printing Glow In Dark Tape, Customized glow in dark tape, customized luminous tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com