How to maintain the magnetic stirring tank?
2021-10-22 09:07:05
Maintenance steps for magnetic mixing tank:
The maintenance of the magnetic mixing tank is an extremely important and regular work. It should be closely coordinated with the extreme operation and maintenance. There should be full-time personnel on duty.
1. Maintenance of the machine:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling (1) Rotary bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately, and eliminated. 2. Installation test:
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight. If necessary, tighten them.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
The maintenance of the magnetic mixing tank is an extremely important and regular work. It should be closely coordinated with the extreme operation and maintenance. There should be full-time personnel on duty.
1. Maintenance of the machine:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling (1) Rotary bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately, and eliminated. 2. Installation test:
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight. If necessary, tighten them.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
nose bar, nose strip,High Quality nose bar, nose strip,nose bar, nose strip Details, CN
Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.breezesolution.com